Product Classification
- HardNess
-
Metallurgical Equipment
- Metallographic sample cutting machine series
- Metallurgical mounted machine series
- Grinding machine
- Metallographic grinding prototype, polished machine, pre-mill series
- Polishing machine
- Metallographic polishing machine, grinding and polishing machine series
- Microscope
- Metallographic analysis system
- Electrolytic polishing corrosion tester
- Sample blower
- End quenching equipment
- Metallurgical Material
Contact Info
Contact：Miss zhang
Phone：021-51083791
Fax：021-51083792
Mobile：18930516192
Email：teshi@teshish.com
Instrumented indentation testing machine
Instrumented indentation testing machine
1. Gantry structure frame adopts the gantry structure in the right figure (the display screen in the figure is replaced by a computer) to greatly improve the rigidity;
2. load range: 3-200kg;
3. load error: less than 1%;
4. pressing stroke: not less than 5mm;
5. Stroke resolution: 0.1 micron;
6. Indenter: WC steel ball, diameter 1, 1.588, 2, 2.5, 5mm, diameter indenter (option); Indenters of other shapes (option)
7. loading and unloading control:
1) The loading curve can be set to control the loading and unloading according to the curve settings (loading rate, loading and unloading point, load holding time);
2) Loading rate (displacement rate of indenter) is adjustable;
3) It can be unloaded or reloaded at the set load or pressing depth;
4) You can set the percentage of unloading to the maximum load and continue loading.
5) The data sampling frequency can be set to accurately determine the complete loading and unloading curve of ball indenter;
The rigidity error is corrected and compensated.
